Ecosense installed standalone Microgrid Lab at Modern College of Engineering, Pune


Department of Electrical Engineering, Modern College of Engineering, Pune welcomed standalone Microgrid Lab supplied and commissioned by Ecosense.


What is a Microgrid?


A Microgrid is a localized group of electricity sources and sinks (loads) that typically operates connected to and synchronous with the traditional centralized grid (macro-grid), but can also disconnect and maintain operation autonomously or go completely off-grid as per the requirement.


How does a Microgrid work?


To understand how a Microgrid works, you first must understand how the grid works.


The grid connects homes, businesses, and other buildings to central power sources, which allow us to use appliances, heating/cooling systems and electronics. But this interconnectedness means that when part of the grid needs to be repaired, everyone is affected. This is where a Microgrid can help. A Microgrid generally operates while connected to the grid, but importantly, it can break off and operate on its own using local energy generation in times of crisis like storms or power outages, or for other reasons.


A Microgrid can be powered by distributed generators, batteries, and/or renewable resources like solar panels. Depending on how it isfueled and how its requirements are managed, a Microgrid might run indefinitely.



Ecosense installed standalone Microgrid Lab at Modern College of Engineering, Pune
Ecosense installed standalone Microgrid Lab at Modern College of Engineering, Pune


Ecosense’s standalone Microgrid system


Ecosense’s Microgrid system is an experimental and research system. It relies on three of the popular Renewable Energy sources i.e.; Solar PV, Wind and Fuel Cell.


Instead of Actual wind turbine we are using Wind Turbine Emulator. Wind turbine emulator mimics the behaviour of wind turbine for hardware level simulations. This system has a DC motor coupled with the Permanent Magnet Synchronous Generator, speed of which is controlled as per the speed reference calculated by solving the mathematical model of wind turbine. Researcher can execute the mathematical models of their newly developed or modified wind turbine and can simulate the speed/power of profile of turbine on hardware environment directly for different wind speeds & pitch angle.


Similarly, instead of using Solar Panels we used Solar PV Emulator. Solar PV Emulator mimics the behaviour of Solar PV Panels for hardware level simulations. This system comprises of two DC Switch Mode Power supplies which can be programmed by user to either behave like a solar panel or a DC Power supply. User can select and program solar panels in the range of 10 Wp - 1000 Wp per channel and configure them to work in Independent or Parallel configurations to actualize a Solar PV Array. By virtue of its features, it can be easily considered as a versatile Solar PV Array.


A 500 W dry hydrogen-based fuel cell is also used as one of the sources in the hybrid system.


WTE-PVE- Fuel Cell Hybrid with DC Microgrid system combines the outputs of Wind Turbine emulator, PV Emulator and Fuel Cell at a common DC link which is further connected to a three-legged programmable inverter. At the output of inverter, a three phase AC Load can be connected to study the behavior of microgrid during loading.


The system uses an application software to perform its operations which is open source and can be modified by students if required to perform their research.



Ecosense installed standalone Microgrid Lab at Modern College of Engineering, Pune
Ecosense installed standalone Microgrid Lab at Modern College of Engineering, Pune


Advantages of Ecosense’s Microgrid system


Ecosense’s Microgrid system enables user to do research in the field of Microgrid management, load side management, priority allocation to renewable sources etc. Ecosense’s Microgrid is an open-source system where a user can reprogram, rewire, and revise the system to carry out their research goals. All the sources are independent of each other and research can also be carried out on each of the sources independently. Ecosense provides source file based on LabVIEW platform which can be easily modified as per the user’s liking. Ecosense appreciates and provide an active support to users carrying out their research.


Masters Training Conducted


After installation a 2- day master’s training is conducted. This Masters training program was focused on educating and training the professors and scholars and technicians in Microgrid Technology who will further train thousands of students and professionals to start their career or business in this very field.



© Copyright 2014-21 All Rights Reserved by Ecosense Sustainable Solutions Pvt Ltd

Ecosense @Twitter  Ecosense @Instagram  Ecosense @Facebook  Ecosense @LinkedIn  Ecosene @Pinterest